Height safety equipment has many products and categories, including working at heights harnesses, fall arrest lanyards, restraint lanyards, rope grab systems, work positioning belts and fall arrest inertia blocks. At Total Protection we offer products from leading manufacturers including, Globestock, Ridgegear, IKAR, Abtech & Kratos, where we will be able to provide a solution for your specific requirement. Height safety equipment generally comes under the LOLER Regulations but can also come under the PPE Regulations and PUWER Regulations.
It is essential that the right equipment is selected for the task and it is essential that a risk assessment is carried out before selecting the equipment, as the wrong selection could prove fatal if for example a person’s lanyard allows them to hit the ground before arresting the fall. Fall Arrest (Height Safety Equipment) must be examined and checked over by a competent person before every use and all defects noted, if the equipment is deemed un-fit for use it should be destroyed or returned to a service centre like Total Protection for further examination and advise. Equipment should be thoroughly examined by a competent person every 6 months and an annual service carried out in accordance with the manufacturers guidelines.
Choosing the right safety equipment for working at heights is key to maximising safety and meeting Legislative & Health & Safety requirements. We provide no-obligation product advice for your particular needs, just contact us and let’s have a chat.
Double action snap scaffold hook. Permanent captive eye. Ideal for quick connecting and disconnecting.
An adjustable padded waist belt. Front attachment point for use as a sit harness and side attachment points for work positioning. May be used with seat strop.
A basic full body harness, with single dorsal (rear ‘D’) attachment point. For general work application where there is a risk of falling. Conforms To BS EN361. Maximum user weight 150Kg
A fall arrest harness with a single (Rear ‘D’) attachment point. 2m shock absorbing lanyard complete with a scaffold hook one end and a karabiner at the other end. The equipment is contained in a kit type bag ideal for transportation and storage.
A fall arrest harness with one attachment point (Rear ‘D’). 2.4m retractable lanyard complete with swivel indicator eye.. The equipment is contained in a kit type bag ideal for transportation and storage.
A fall arrest harness with one attachment point (Rear ‘D’). 1.25m – 1.75m Adjustable Restraint Lanyard complete with karabiners each end. The equipment is contained in a kit type bag ideal for transportation and storage.
10m Fall Arrest device from the TORQ range. Designed to provide fall protection from falls from height. Anchored above the user, it gives the user a safe area of work.
The AB15RT has an integral winch mechanism, so in the event of a fall, the top man will be able to raise or lower the user to a safe area. Swivel anchor eye on top. Can be mounted onto the Tripod or Davit arm for access and egress from a confined space.
15m Fall Arrest device from the TORQ range. Designed to provide fall protection from falls from height. Anchored above the user, it gives the user a safe area of work.
The Abtech AB2.4T is a small self-retracting lifeline designed to provide protection from falls from height. Anchored above the users center of gravity it gives the user a safe area of work.
This is a small, lightweight, retractable fall arrest device. The device is ideal for applications where maximum mobility is required whilst protecting a worker from the potential of falls
A full body harness with two attachment points. A dorsal (rear) and chest attachment points both suitable for fall arrest. The chest point may also be used for evacuation, industrial abseiling or attachment to a vertical rail or rope system