Moicon T80 Toxic Gas Monitor
Price on Application
The Monicon T80 is a high quality, self contained,toxic gas sensor that offers a host of sophisticated features to provide fast, reliable warnings against exposure to dangerous concentrations of toxic gases such as CO, SO2, H2S, NH3, O3, NO, NO2,HCl, HCN, Cl2 and oxygen.
- Microprocessor based
- 4-20mA Analogue Output
- Voltage free relay contacts
- RS485 digital interface
- Alphanumeric dot-matrix display
- “One Person” calibration
- Gel based electrochemical sensor
- Standalone operation
The CGS500-IR sensor is a NDIR (non dispersive infrared) sensor designed to replace thermocatalytic gas sensors for monitoring hydrocarbon gases in the range 0-100% LEL. The CGS500-IR is available as a sensor only or fitted in an EEx e certified junction box.
The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 43 controller, the OLCT 10N provides a fast and accurate response.
The AV2-N4X audible alarm is capable of producing coded blasts or sustained tones. The alarm assemblies are specifically designed for non-hazardous general purpose locations or environments where a very bright visual and high decibel alarm signal is required.
The Monicon Single Channel Gas Monitor is an innovative, cost effective, wall mounted unit. The Single Channel Gas Monitor is also compatible with a wide range of third party sensors and 4-20mA transmitters including temperature probes.
The AV2-C1D2C audible alarm is capable of producing coded blasts or sustained tones. The alarm assemblies are specifically designed for hazardous locations or corrosive environments where a very bright visual and high decibel alarm signal is required.
Designed for use in boiler rooms and parking garages, the OLCT 10 and OLC 10 monitors give you the most cost-effective solution for the continuous monitoring of toxic (OLCT 10) or flammable gases (OLCT 10, OLC 10) and vapors in ambient air
The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs
3M Gas & Flame has designed the SURVEYOR 4B as a monitoring apparatus specifically designed to ensure the safety of boiler plants, battery charging rooms or small units where your operations are at risk due to the possibility of flammable gas leaks.